Auto Zero - KERN PLJ 600-2GM Betriebsanleitung

8.7.2 Auto Zero

This function is used to tare small variations in weight automatically.
In the event that small quantities are removed or added to the material to be
weighed, incorrect weighing results can be displayed due to the "stability
compensation" in the balance. (e.g. slow flow of liquids from a container placed on
the balance, evaporating processes).
When apportioning involves small variations of weight, it is advisable to switch off this
function.
Auto Zero
Auto Zero
 Selecting the menu item
TARE
 Press
 Press
until the following display appears
 To change your selection, press
 To change your selection, press
 Setting will be imported by pressing
F
For this, press repeatedly until SavE ? appears on the display. Store changes
carried out by pressing
PLJ-GM-BA-e-1614
no Disconnection of auto zero function
YES Auto zero function turned on
Operation:
TARE
.�
.
PRINT
PRINT
.
Display:
P1 rEAd
1.1.Fil
1.2 Auto
1.2 Auto
.
no
YES
33