ECM V-Titan 64 Bedienungsanleitung Seite 21

Press + in order to reach the submenu of 't1'.
Here you can adjust the grind time to a tenth of a second by quickly
pressing + or −.
Wait a short while after adjusting the time until 't1' reappears on the
display.
Press − so that 't2' is indicated.
If you would like to adjust 't2' only and keep 't1' unchanged, press –
on the display immediately after 't1' appears in order to reach 't2'
directly.
Quickly press + to increase and
Wait a short while to exit the program.
Bedienungsanleitung/ User Manual V-Titan 64
− to decrease the tenths of a second.
20
ENGLISH