Product Description And Specifications - Bosch GEX 150 TURBO Professional Originalbetriebsanleitung

OBJ_BUCH-522-005.book Page 11 Wednesday, April 30, 2014 3:07 PM
Safety Warnings for Sander
 Use the machine only for dry sanding. Penetration of wa-
ter into the machine increases the risk of an electric shock.
 Pay attention that no persons are put at risk through
sparking. Remove any combustible materials in the vi-
cinity. Sparking occurs when sanding metal materials.
 Caution, fire hazard! Avoid overheating the object be-
ing sanded as well as the sander. Always empty the
dust collector before taking breaks. In unfavourable
conditions, e. g., when sparks emit from sanding metals,
sanding debris in the dust bag, micro filter or paper sack
(or in the filter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with remainders of var-
nish, polyurethane or other chemical materials and when
the sanding debris is hot after long periods of working.
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for dry sanding of wood, plastic,
metal, filler as well as coated surfaces.
Machines with electronic control are also suitable for polish-
ing.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Bolt hole
2 Unlocking button
3 Mode selector switch
Bosch Power Tools
4 Sealing collar
5 Sanding plate
6 Screw for fastening the sanding plate
7 Allen key
8 Sanding sheet*
9 Handle (insulated gripping surface)
10 Auxiliary handle (insulated gripping surface)*
11 On/Off switch
12 Extraction outlet piece
13 Screw for extraction outlet piece
14 Thumbwheel for orbit frequency preselection
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Random Orbital Sander
Article number
Preselection of orbital stroke
rate
Rated power input
No-load speed
No-load orbital stroke rate
Sanding plate speed in
operating mode 1
Orbit diameter
Sanding plate diameter
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted noise levels of the product are:
Sound pressure level 81 dB(A); Sound power level 92 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
a =4 m/s , K<1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
English | 11
GEX 150 TURBO
0 601 250 7..

W 600
-1
min 3100–6650
-1
min 6200–13300
-1
min 290–620
mm 4.5
mm 150
kg 2.4
/II
3 609 929 C83 | (30.4.14)