Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GWX 13-125 S Professional Originalbetriebsanleitung

20 | English
Do not touch grinding and cutting discs until they have
u
cooled down. The discs can become very hot while work-
ing.
Release the On/Off switch and set it to the off position
u
when the power supply is interrupted, e. g., in case of
a power failure or when the mains plug is pulled. This
prevents uncontrolled restarting.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is intended for roughing metal, stone and
ceramic materials and for drilling tiles.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
A special protective guard for cutting must be used when
cutting bonded abrasives.

Technical data

Angle grinder
Article number
Rated power input
Power output
Rated speed
Speed adjustment range
Max. grinding disc diameter
Speed preselection
Restart protection
Constant electronic control
Starting current limitation
Kickback stop
1 609 92A 7VN | (31.05.2022)
Sufficient dust extraction must be provided when cutting
stone.
Together with the hand guard (accessory), the power tool
can be used for brushing and sanding with elastic sanding
pads.
The power tool is suitable only for working without water.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Direction of rotation arrow on housing
(3) Lever
(4) On/off switch
(5) Speed preselection thumbwheel (GWX ... S/T)
(6) Auxiliary handle (insulated gripping surface)
(7) Protective guard for grinding
(8) X-LOCK grinding disc/flap disc
(9) Protective guard for cutting
a)
(10) X-LOCK cutting disc
(11) X-LOCK backing pad for fibre discs
a)
(12) X-LOCK fibre disc
(13) X-LOCK clip for fibre discs
a)
(14) Hand guard
(15) X-LOCK cup brush/disc brush
(16) X-LOCK holder
(17) Handle (insulated gripping surface)
(18) Extraction guard for cutting with cutting guides
a)
(19) Diamond cutting disc
(20) X-LOCK diamond core cutter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWX 13-125 GWX 13-125 S
3 601 GB5 0.. . 3 601 GB6 0..
W 1300
W 700
-1
min 11,500
-1
min – 2800–11,500
mm 125
–
●
●
●
●
a)
a)
a)
a)
a)
a)
a)
GWX 17-125
3 601 GC3 0..
1300 1700
700 1010
11,500 11,500
–
125 125
● –
● ●
● ●
● ●
● ●
Bosch Power Tools