Installation Ls300; Installing Roof Exhaust R 500 - Dometic RMF8500 Montageanleitung

Installation

4.3.2 Installation LS300

To install the ventilation grilles, cut two rectan-
gles (a = 249 mm x b = 490 mm) in der
Fahrzeugaußen-wand angebracht.
outer wall of the vehicle ( for position of the
cuts, see Fig. 22 ).
1
Cut two rectangles in
the exterior wall of the
vehicle.
2
Seal the mounting
frame making it water-
proof ( does not apply
for mounting frames
with integral seal
3
Insert ventilation grille.
4
Install locking slider.
5
Lock ventilation grille.
in the
b
a
Fig. 24
14 x
Fig. 25
Fig. 26
Fig. 27
Fig. 28

4.3.3 Installing roof exhaust R 500

Measurements of roof exhaust R 500
Length Width
595 mm 205 mm
Roof cut out: 87 mm x 507 mm
1
Seal the installation
bays and screw them
to the vehicle roof.
2
Place the hood in
postion and screw it to
the installation bays.
Sealing of mounting frame
DANGER!
Pay attention to clean and residue-free
workmanship if silicone sealing com-
pound or similar is used elsewhere (e.g.
sealing of the ventilation grille frames).
There is a danger of fire if silicone threads
come into contact with hot parts or an
open flame.
18
Height
150 mm
Fig. 29
Fig. 30
Fig. 31