Track Skip; Switching The Jog Mode; Jog Dial Function - Pioneer MEP-7000 Bedienungsanleitung

BASIC CONTROLLER OPERATIONS

TRACK SKIP

 Using the TRACK SEARCH (, ) buttons
Press one of the TRACK SEARCH (, ) buttons
• Each time the button is pressed, the player will skip to the
beginning of the next track in the direction indicated by the
button. (To skip to the beginning of the track preceding the
current one, the  button must be pressed twice.)
• When the button is held depressed, the player moves
continuously in the direction indicated. When the button is
held depressed for two seconds or more, track skip is
performed at higher speed.
• If an attempt is made to continue the track skip earlier than
the first track (track No. 1), the track skip will move to the last
track.
• Likewise, if an attempt is made to press the  button to
continue the track skip later than the last track, the track
skip will move to the first track (track No. 1).
 Super fast track search
While holding one of the TRACK SEARCH (, ) buttons
depressed, rotate the jog dial.
• While holding the button depressed, rotate the jog dial in the
direction you wish to perform the track skip operation, and
high-speed track skip will be performed in proportion to the
amount the jog dial is turned.
• The skip direction follows the direction in which the jog dial
is rotated. The TRACK SEARCH button pressed has no effect
on the direction.
• The skip operation is canceled when the TRACK SEARCH
button is released.

SWITCHING THE JOG MODE

Press the SCRATCH or JOG BREAK buttons.
The mode will switch to either the SCRATCH, JOG BREAK, or
OFF mode. When the side with the flashing LED is pressed, the
LED indicator goes out and the Jog mode is turned OFF.

JOG DIAL FUNCTION

1 Rotate during playback (pitch bend: when jog mode is OFF).
• Disc rotation will be accelerated (FWD+) or decelerated
(REV–) in proportion to the degree of jog dial rotation.
• When jog dial rotation is stopped, the disc rotation returns
to its former speed.
2 Rotate during playback (scratch play: when jog mode is set
to SCRATCH).
See the section "SCRATCH PLAY" (P. 39).
3 Rotate during playback (jog break: when jog mode is set to
JOG BREAK).
See the section "JOG BREAK PLAY" (P. 39).
4 Rotate during pause mode (frame search).
• Search will be performed in one-frame increments.
• When the jog dial is turned in the FWD+ direction at a stable
speed, the playback sound (1x speed) will be output.
During cue standby, press one of the SEARCH (, )
5
buttons, then rotate jog dial (cue point search).
If the button is pressed during cue standby, if the jog mode is
set to something besides SCRATCH, the unit will enter
"audible pause" mode, and the jog dial can be rotated to
search for a cue point candidate. Following movement of the
point, pressing the CUE button sets the new cue point.
6 During playback, rotate the jog dial while holding one of the
SEARCH (, ) buttons depressed (super fast search).
While holding the button depressed, rotate the jog dial in the
direction you wish to perform the search. Search will be
performed at accelerated speed, in proportion to the direction.
7 During playback, rotate the jog dial while holding one of the
TRACK SEARCH (, ) buttons depressed (super fast
track search).
While holding the button depressed, rotate the jog dial in the
direction you wish to perform the track search. Track search
will be performed at accelerated speed, in proportion to the
direction and amount of dial rotation.
8 Rotate while holding the PITCH BEND (+/–) button depressed
(super fast pitch bend).
While holding the button depressed, rotate the jog dial in the
direction you wish to modify the speed; the speed will change
faster than during normal pitch bend.
35
En