Basic Operation - CyberPower PR750ELCD Bedienungsanleitung

DESCRIPTION
1. Power Switch / Power On Indicator
Used as the master on/off switch for equipment connected to the battery power supplied outlets.
2. Online Indicator
This LED is illuminated when the utility power is normal and the UPS outlets are providing power,
free of surges and spikes.
3. On Battery Indicator
During a severe brownout or blackout, this LED is illuminated and an alarm sounds (two short
beeps followed by a pause) to indicate the UPS is operating from its internal batteries.
4. Fault
This LED is illuminated if there is a problem with the UPS.
5. Replace Battery Indicator
This LED is illuminated to remind users to replace the battery.
6. Tab / Status Button
For UPS status information, press the button for 1 second. For additional information including the
use of the button as a Tab, please refer to the Function Setup Guide.
7. Enter / Setup Button
Press the Setup button for 1 second to enter setup menu and then select the functions for
configuration. For more information about the Setup/Enter button, please refer to the Function
Setup Guide.
8. Up / Control Button
Press the Control button for 1 second to enter control menu and then select the functions for

BASIC OPERATION

3