Endress+Hauser FMR51 Einbauanleitung

Installation Instruction
Replacing antenna FMR51
Micropilot FMR51
EA01069F/00/A2/01.12
71207573
Instruction is valid for the following spare part set:
Order number Original Spare part set
Antenna FMR51
XPF0022 - #######
We recommend that the Installation Instructions be kept with the packaging at all times.
Confirmation whether the spare part is permitted to be used with the measuring device
The spare parts set and Installation Instructions are used to replace a faulty unit with a functioning unit of the same type. 
Use genuine parts from Endress+Hauser only.
Only original spare parts supplied by Endress+Hauser shall be used with the measuring device. Therefore, before use, check whether the spare
part set is compatible with the measuring device.
A spare parts overview label is located in the connection compartment cover of the measuring device. If there is no label or the spare part is not
listed the appropriate spare part can also be identified via W@M Device Viewer.
How carrying out such a check via the W@M Device Viewer is described below:
i
Choose the Endress+Hauser Device Viewer via web browser: www.endress.com/deviceviewer
Enter the serial number (Ser. No.) of the device into the W@M Device Viewer (on the label of the transmitter), then click on "Spare parts".
The list of the available spare parts for the device is displayed.
Check the order number on the packaging label of the spare part set.
Check whether the order number of the spare part set is specified in the list displayed by the device viewer:
= YES, the spare part can be used.
= NO, the spare part may not be used.
Ser. No.:12345 Ser.No.:1234567890
i
www.endress.com/deviceviewer
Usage
Micropilot FMR51
Device Viewer
Ser. No.: 12345
=
?
71207573