Herunterladen Inhalt Inhalt Diese Seite drucken
Verfügbare Sprachen

Verfügbare Sprachen

PASHA
PH/2211 - PHR/13
Cod.7.028.Rev.00 data: 10/10/22
SCHEDA PRODOTTO
PRODUCT INFORMATION
FICHE PRODUIT
PRODUKTDATENBLATT
Fiam PASHA PHR/13 / PASHA PH/2211
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Fiam PASHA PHR/13

  • Seite 1 PASHA PH/2211 - PHR/13 Cod.7.028.Rev.00 data: 10/10/22 SCHEDA PRODOTTO PRODUCT INFORMATION FICHE PRODUIT PRODUKTDATENBLATT Fiam PASHA PHR/13 / PASHA PH/2211...
  • Seite 2 Art. PH/2211 Art. PHR/13 L2= 1220 mm L1= 450 mm L1= 460 mm Praticare i fori alla distanza L1 per la posizione verticale e a L2 per la posizione orizzontale. Drill the two holes at a distance of L1 for the vertical position and of L2 for the horizontal one. Perforer les deux trous à...
  • Seite 3 Assicurarsi di avere una buona presa sul telaio e sulla cornice prima di sollevare lo specchio. Before raising the mirror, make sure that the grip on the iron and glass frame is tight. Avant de soulever le mirroir, assurer la prise du cadre et de la structure en fer.
  • Seite 4 Non appoggiare lo specchio sugli spigoli della cornice. Do not lay the mirror on the corners of the frame. Ne pas poser le miroir sur les coins de la bordure. Stellen Sie nicht das Spiegel über die Kanten des Rahmen. Inclinare lo specchio facendo presa sul telaio e la cornice;...
  • Seite 5 PASHA FREESTANDING Art. PH/2211 Assicurarsi di avere una buona presa sul telaio e sulla cornice prima di sollevare lo specchio. Before raising the mirror, make sure that the grip on the iron and glass frame is tight. Avant de soulever le mirroir, assurer la prise du cadre et de la structure en fer.
  • Seite 6 Lato con gomma Side with rubber Côté avec du caoutchouc Seite mit Gummi 6/20...
  • Seite 7 L’altezza di foratura è indicativa. Se si vuole montare lo specchio più o meno inclinato, forare di conseguenza. The drilling height is only a suggestion. For a different inclination, drill accordingly. La hauteur du trou est seulement indicative. Pour avoir une inclinaison différente, prevoir un trou à la hauteur desirée. Die Bohrunghöhe nur anzeigend.
  • Seite 8: Descrizione Del Prodotto E Destinazione D'uso

    Lo Specchio PASHA - Cod. Art. PH/2211 - PHR/13 è un Specchio concepito per l’arredamento di interni, fabbricato in vetro float curvato. Lo Specchio PASHA è stato prodotto negli stabilimenti di FIAM ITALIA s.r.l., siti in Via Ancona 1/B, 61010 Tavullia (PU), Italia - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it - www.veblen.eu...
  • Seite 9: Utilizzo Corretto

    Istruzioni di sicurezza • Utilizzo corretto Una volta rimosso l’imballo originale, lo Specchio PASHA deve essere posizionato su di una superficie perfettamente piana. Tutte le basi di appoggio dello Specchio PASHA devono aderire perfettamente alla superficie sulla quale viene posizionato, in caso contrario, la stabilità...
  • Seite 10: Pulizia E Manutenzione

    Pulizia e manutenzione • Pulizia Alcuni prodotti per la pulizia della casa e dell’arredamento possono danneggiare il vetro float, di cui è composto lo Specchio PASHA. Al fine di conservare integro il vetro float, di cui è composto lo Specchio PASHA, Le consigliamo di mantenerlo pulito solo ed esclusivamente con un panno di stoffa o di pelle bagnato con acqua e sapone liquido, se necessario.
  • Seite 11: Product Description And Intended Use

    The PASHA Mirror - Art. Code PH/2211 - PHR/13 is a Mirror intended as an item of indoor furniture. It is manufactured from curved float plate glass. The PASHA Mirror was produced at the FIAM ITALIA s.r.l. factory at Via Ancona 1/B, 61010 Tavullia (PU), Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it - www.veblen.eu...
  • Seite 12: Intended Use

    Safety instructions • Intended Use Once removed from its original packaging, the PASHA Mirror must be placed on a perfectly flat surface. All the PASHA Mirror's supporting bases must be resting firmly on the surfaces on which it is placed; otherwise, the PASHA Mirror may lose stability, making it hazardously unstable.
  • Seite 13: Cleaning And Care

    Cleaning and care • Cleaning Some household and furniture cleaning products may damage the float glass from which the PASHA Mirror is made. When cleaning the glass of the PASHA Mirror, use a damp cloth or leather with washing up liquid or soft soap if necessary. Do not use powder detergents or detergents containing abrasives for cleaning the PASHA Mirror, since they may scratch the float glass.
  • Seite 14: Instructions De Sécurité

    Le Miroir PASHA - Code Art. PH/2211 - PHR/13, est un Miroir conçu pour l’ameublement d’intérieurs et fabriqué en verre flotté bombé. Le Miroir PASHA a été fabriqué dans les établissements de FIAM ITALIA s.r.l. situés en Via Ancona 1/B, 61010 Tavullia (PU), Italie - Tél: +39.0721.20051 -Fax: +39.0721.202432 - www.fiamitalia.it - www.veblen.eu...
  • Seite 15: Utilisation Correcte

    Instructions de sécurité • Utilisation correcte Une fois l’emballage original enlevé, le Miroir PASHA doit être positionné sur une surface parfaitement plane. Toutes les bases d’appui du Miroir PASHA doivent adhérer parfaitement à la surface sur laquelle le Miroir est positionné; dans le cas contraire, la stabilité...
  • Seite 16: Nettoyage Et Entretien

    Nettoyage et entretien • Nettoyage Certains produits pour le nettoyage de la maison et des meubles peuvent endommager le verre flotté dont est composée le Miroir PASHA. Afin de maintenir dans un parfait état le verre flotté dont est composée le Miroir PASHA, nous vous conseillons de le nettoyer uniquement avec un chiffon en tissu ou en cuir imbibé...
  • Seite 17: Produktbeschreibung Und Zweckbestimmung

    Der Spiegel PASHA - Artikelcode PH/2211 - PHR/13 ist ein für die Inneneinrichtung bestimmter Spiegel aus geformtem Floatglas. Der Spiegel PASHA wurde hergestellt in den Werken der Firma FIAM ITALIA s.r.l., Via Ancona 1/B, 61010 Tavullia (PU), Italien - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it - www.veblen.eu...
  • Seite 18: Sachgerechte Benutzung

    Sicherheitsrelevante Hinweise • Sachgerechte Benutzung Nach dem Entfernen der Originalverpackung kann der Spiegel PASHA auf einer vollkommen waagrechten Fläche aufgestellt werden. Alle Auflageflächen des Spiegels müssen gut aufliegen, damit der Spiegel auch wirklich stabil steht, und nicht umkippen kann. Das Gewicht des Spiegels PASHA muss gleichmäßig verteilt sein, damit der Spiegel sicher hängt. Gegenstände, die das Glas zerkratzen oder anderweitig beschädigen könnten (wie zum Beispiel chemische Produkte, die Fluorwasserstoffsäure enthalten) sollten nicht auf dem Spiegel abgestellt werden.
  • Seite 19: Pflege Und Wartung

    Pflege und Wartung • Pflege Beachten Sie bitte, dass nicht alle handelsüblichen Reinigungs- und Pflegeprodukte für Floatglas geeignet sind, und dieses sogar beschädigen können. Wir empfehlen Ihnen daher, das Floatglas einfach nur mit einem feuchten Stoff- oder Ledertuch sauber zu halten, und ggf. etwas Flüssigseife zu verwenden.
  • Seite 20 Fiam Italia S.r.l. Via Ancona, 1/b - 61010 Tavullia (PU) Tel.: +39.0721.20051 - Fax: +39.0721.202432 www.fiamitalia.it...

Diese Anleitung auch für:

Pasha ph/2211

Inhaltsverzeichnis