Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Installation
The switch interface has flexible connection lines
2
(0.75 mm
) with cable end sleeves. Remove the
rubber caps that are on the end sleeves before
connecting.
This allows connecting directly to the switches used
according to the following diagram.
If you do not use all channels, leave the
rubber caps on the cable end sleeves or the
unused channels.
Keep the maximum cable length of 3 m between
switch and switch interface.
The switch interface is only adapted for
connecting potential-free switches.
Do not connect the connection lines to mains
voltage!
25
Werbung
Kapitel
Inhaltsverzeichnis
