Amplicomms BigTel 40plus Bedienungsanleitung Seite 20

T
ELEPHONING
Quick dialling
It is possible to store 10 phone numbers so that they are dialled simply by
pressing two buttons (quick dialling).
You cannot delete the phone numbers stored on the quick dial buttons.
Existing numbers are overwritten when new phone numbers are stored.
Programming quickdial buttons
1 Lift the receiver.
2 Press .
3 Enter the phone number (max. 24 digits) and press
4 Enter the required memory location number (0 - 9).
5 Replace the receiver. The entry is saved.
Dialling using quick dial buttons
1 Lift the receiver.
2 Press .
3 Enter the required memory location number (0 - 9).
4 The phone number stored is automatically dialled.
Increasing the receiver volume to +40 dB
The receiver volume can be increased to +40 dB by pressing the
Setting the receiver volume
You can adjust the receiver volume using the rotary knob.
Tone control
You can adjust the tone produced in the receiver using the slide control
on the right-hand side of the housing. The tone control only works when
the 40 dB amplification is activated.
Ringing volume
You can adjust the ringing volume using the slide control
hand side of the housing.
20
.
button.
.
3 4 5
on the right-