Introduction - LD LDEB82AG3 Bedienungsanleitung

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for a
cool-down period of at least 10 minutes before handling or transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This device is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively applicable national accident
prevention rules and regulations. As a manufacturer, Adam Hall is obligated to notify you formally about the existence of potential health risks.
Hearing damage due to high volume and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels (SPL)
that can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, avoid prolonged exposure to
volumes in excess of 90 dB.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

INTRODUCTION

Stinger G3 Series - Workhorse Loudspeakers For Pros
®
Exceptional sound, reliable performance and unparalleled value across the board - that's LD Systems' Stinger
Real workhorses for demanding applications, these loudspeakers have been engineered to provide truly professional
sound reinforcement solutions. The Stinger
their class. Custom designed drivers with high power handling and BEM modelled waveguides deliver immaculate audio
quality, extended low frequency response and coherent coverage.
Sporting lightweight Class D power stages, active Stinger
tops feature up to a massive 500 watts RMS output and carefully tailored presets for flat response, fullrange, satellite or floor monitor
applications. LD Systems' proprietary DynX
at maximum levels. Producing tremendous low end punch and definition with up to 800 watts RMS output power, Stinger
subwoofers include user-friendly presets for rapid system integration and cardioid array configurations.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts
inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.
G3 line includes active and passive models that are simply outstanding in
®
G3 models are capable of huge sound pressure levels. The multi-purpose
®
DSP technology ensures perfect time alignment and distortion-free performance even
®
G3 Series.
®
G3
®