Axis Q7404 Installationsanleitung Seite 8

Page 8
AXIS Camera Management - multiple cameras/large installations
AXIS Camera Management can automatically find and set IP addresses, show connection status,
and manage firmware upgrades for multiple Axis video products.
Automatic discovery
1. Check that the video encoder is connected to the network and that power has been applied.
2. Start AXIS Camera Management.
3. When the AXIS Q7404 appears in the window, there is one entry for each of its four video
channels (e.g. AXIS Q7404 Channel 1). Right-click a link and select Live View Home Page to
open the home page for that video channel.
4. See page 10 for instructions on how to set the password.
Assign an IP address in a single device
Repeat the following steps for each video channel:
1. Select one of the AXIS Q7404 Channels in AXIS Camera Man-
agement and click the Assign IP button
2. Select Assign the following IP address and enter the IP
address, the subnet mask and default router the device will
use.
3. Click the OK button.
AXIS Q7404 Installation Guide
.