Axis Q7404 Installationsanleitung Seite 15

AXIS Q7404 Installation Guide
Pin assignments:
Function Pin number
GND 1
3.3VDC 2
Power
Configurable 3 - 4
(Input or
Output)
The following connection diagram gives an example of how to connect an auxiliary device to the
AXIS Q7404.
AXIS Q7404
3.3V max 250mA
3.3V
G
Notes
Ground
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
Digital input - Connect to GND to activate, or
leave floating (or unconnected) to deactivate.
Digital output - Uses an open-drain NFET
transistor with the source connected to GND.
If used with an external relay, a diode must
be connected in parallel with the load, for
protection against voltage transients.
I/O configured as input
I/O configured as output
D
S
Specifications
Max load = 250mA
Min input = - 40V DC
Max input = + 40V DC
Max load = 100mA
Max voltage = + 40V DC
E.g. push button
Page 15