Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The Optional Wall Saver is designed to avoid damages while moving the bed if the bed is not unplugged . This wall
saver will easily unconnect itself .
INSTALLATION
Required Tools: None
Procedure
1 .
Insert the connector in the outlet on the bed, as indicated in the figure below .
2 .
Screw the connector's screws at the bed location .
3 .
Join both cables .
4 .
Insert the connector in the other one on the cable from the hospital .
5 .
Screw the connector's screws to the hospital connector .
www.stryker.com
Wall Saver - FA64208
2131-209-005 REV B
Return To Table of Contents
1-77
Werbung
Kapitel
Inhaltsverzeichnis
