Calibrating A 90° Angle; Calibrating A 45° Angle - Holzmann TAS 165 Betriebsanleitung

11.4 Calibrating a 90° angle
Check that the angle between the saw blade and the baseplate is exactly 90° by using a set
square. Adjust the angle using the two screws underneath the baseplate if necessary.
11.5 Calibrating a 45° angle
Adjust the saw blade into exactly 45° to the baseplate by using a set square. Loosen the bevel
angle indicator and tighten it securely at exactly 45° on the scale.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
ASSEMBLY AND OPERATION
TAS165 / TAS 165PRO
29