Troubleshooting; Disposal; Manufacturer's Warranty - Tools - Hilti AG 100-7S Bedienungsanleitung

9 Troubleshooting

Fault
The power tool doesn't start.
en
The power tool doesn't achieve
full power.

10 Disposal

Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials
must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back your old power tools or appliances for recycling. Please ask your Hilti customer service department or
Hilti representative for further information.
For EC countries only
Disposal of electric tools together with household waste is not permissible.
In observance of the European Directive on waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electrical appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.

11 Manufacturer's warranty - tools

Please contact your local Hilti representative if you have
questions about the warranty conditions.
22
Possible cause
Interruption in the electric supply.
The supply cord or plug is defective.
The carbon brushes are worn.
The extension cord's conductor cross
section is inadequate.
Remedy
Plug in another electric appliance and
check whether it works.
Have the parts checked by a trained
electrical specialist and replaced if
necessary.
Have it checked by a trained electrical
specialist and replaced if necessary.
Use an extension cord with an ad-
equate conductor cross section.