Repeat/Shuffle Playback; Firmware-Update - Yamaha YHT-S401 Bedienungsanleitung

Repeat/shuffle playback

1
Press OPTION to enter the option menu.
2
Press / to select "2.REPEAT" and
press ENTER.
3
Press / to select the available option
and press ENTER.
Available options (Default setting: OFF)
iPod/iPhone
Cancels repeat
OFF
playback
Repeats playing back a
ONE
music singly
Plays back all the music
ALL repeatedly in your iPod/
iPhone
FOLDER
RANDOM
■ Shuffle playback of iPod/iPhone
1
Press OPTION to enter the option menu.
2
Press / to select "3.SHUFFLE" and
press ENTER.
3
Press / to select the parameter and
press ENTER.
Available options (Default setting: OFF)
OFF: Cancels shuffle playback
SONGS: Plays back music in random order.
ALBUMS: Plays back albums in random order.
Displaying music information
You can display information on the music currently
playing back.
Press INFO.
Press INFO repeatedly to switch the information
(displayed for three seconds) in the order below.
iPod/iPhone: SONG (music name) → PLAY TIME
(playback time) → ARTIST (artist name) → ALBUM
(album name) → SONG (music name)
USB device
USB device: FILE (file name) → PLAY TIME (playback
Cancels repeat
time) → SONG (music name) → ARTIST (artist name) →
playback
ALBUM (album name) → FILE (file name)
Repeats playing back a
Notes
music singly
• If the information cannot be displayed entirely in the front panel
Plays back all the music
display, it is scrolled once.
repeatedly in your USB
• There are some characters that cannot be displayed in the front
device
panel display of this unit.
Plays back all the music
repeatedly in the folder
saved in your USB
Firmware update
device
You can update the firmware of this unit.
Plays back all the music
at random in the folder
1
saved in your USB
device
2
3
4
y
• Press
version of this unit firmware displayed in the front panel
display.
• See the "Messages for firmware update" section in
"Troubleshooting" (☞ P. 28) about the messages for firmware
update that appear in the front panel display.
Playing back iPod/iPhone and USB device
Copy the firmware data into USB flash
memory. Then connect the USB flash
memory to the USB port on the front panel of
this unit.
Make sure that you copy the firmware file into the
root directory of the USB flash memory. Refer to the
documentation associated with the firmware file.
Press SETUP.
Press / to select "6:FIRMWARE" and
press ENTER.
Press / to select "6-2:USB UPDATE"
and press ENTER.
The update starts.
/ to select "6-1:VERSION" and you can see the
17
En