Installing The Usb Power Adapter; Setting Up Power Supply - Bresser Science TFM-201 Bedienungsanleitung

14 Installing the USB power adapter

1
Illustration 4: USB power adapter with exchangable attachment
1 USB power adapter
3 Adapter attachment (UK)
1. Place suitable adapter attachment with its notches on the pins of the USB power adapter.
2. Turn adapter attachment in LOCK direction until it is locked.
3. Put the USB plug of the power cable into the USB port of the power adapter.
4. To remove the adapter attachment, push the PUSH button and turn the attachment in OPEN direc-
tion.
NOTICE
Using the USB power cable with a computer
Alternatively the device can be powered by a computer via the included USB power cable: Put the
USB plug into a free USB port of the computer.

15 Setting up power supply

Illustration 5: DC connection socket for coaxial/barrel connector
1 On/Off switch
1. Put the DC connector of the power cable into the DC connection socket of the device.
2. Put the mains plug of the power cable into the power outlet.
IM_Science_TFM_Infinity_de_en_BRESSER_v1016
4
2 Adapter attachment (EU)
4 USB power cable with coaxial/barrel con-
nectorUSB power cable with coaxial/barrel
connector
1
2
2
2 DC connection socket
Imprint | 14
3
23 / 29