Charging The Rechargeable Battery - Meister AS108VLM Originalbetriebsanleitung

5401060-Akkubohrsc_man 04.02.15 09:26 Seite 48
Safety symbols
The symbols on the housing have the
following meanings:
Conformity with European
safety norms
Recycle when the item has
come to the end of its useful
life
Do not introduce lithium-ion
rechargeable batteries into
the household waste.
Polarisation of the
connection plugs for the
charger cradle.
Outside: Minus,
Inside: Plus
"Tested safety" seal
Housing is double insulated
Only for use in dry indoor
spaces
Read the operating
instructions
Ambient temperature,
maximum of 50 °C
Do not throw the
rechargeable battery into
water
Do not allow the
rechargeable battery to enter
into the waste water system.
Do not throw the
rechargeable battery into fire
48
7 – Charging the
rechargeable battery
Before using the device for the first
time
The battery is not completely charged
when the item leaves the factory.
Figure 5-1: Connect the plug power
supply and the charger cradle. Insert the
rechargeable battery as far as it will go
into the battery compartment.
The LEDs on the battery indicate the
charging process:
LED LED LED
Red Yellow Green
The charging process takes about
3 to 5 hours.
Remove the rechargeable battery from
the charger cradle after you have
finished charging it.
The rechargeable battery will attain its
full performance capability only after a
number of charging cycles.
Figure 5-3: Insert the rechargeable
battery as far as it will go into the
handle of the cordless drill-screwdriver.
The cordless drill-screwdriver is ready
for operation.
Charging
process
Initial
Advanced
Complete