Bosch PHG 630 DCE Bedienungsanleitung Seite 10

Product Specifications
Hot Air Blower
Order number
Power consumption max.
Air flow approx.
Temperature at nozzle outlet approx.
Temperature measuring accuracy
at the nozzle outlet
on the display
Display operating temperature*
Weight (without accessories) approx.
Protection class
* Outside of the operating temperature, the display can become black.
Please observe the order number of your unit. The trade names of the individual units may vary.
Noise Information
Measured values determined according to EN 50 144.
Typically the A-weighted sound pressure level of the
product is less than 70 dB(A).
Product Elements
1 Nozzle
2 Heat protection
3 PHG 500-2/PHG 600-3:
On-off switch/Air flow and temperature regulator
3 PHG 630 DCE:
On-off switch/Air flow regulator
4 Button for setting the temperature
(PHG 630 DCE)
5 Display (PHG 630 DCE)
6 Wide nozzle*
7 Glass protection nozzle*
8 Reflector nozzle*
9 Welding rod*
10 Welding shoe*
11 Reduction nozzle*
12 Heat-shrinkable tubing*
* Not all the accessories illustrated or described are in-
cluded in standard delivery.
1 609 929 E16 • (03.05) T
PHG 500-2
0 603 29A 0..
[W] 1600
[l/min] 240/450
[°C] 300/500
±10 %
–
[°C] –
[kg] 0.75
/ II
Intended Use
The unit is intended for the forming and welding of
plastic, removal of paint and the warming of heat-
shrinkable tubing.
It is also suitable for soldering and tinning, loosening of
adhesive joints and the defrosting of water lines.
The unit must not be damp and must also not be
s
operated in damp surroundings.
Before each use of the unit, check the cable and
s
plug. If damage is detected, do not use the unit.
Have repairs performed only by a qualified techni-
cian. Never open the unit yourself.
Connect units that are used in the open via a re-
s
sidual current device (RCD) with an actuating cur-
rent of 30 mA maximum. Do not operate the unit in
rain or moisture.
Do not carry or hang up the unit by the cable.
s
Always direct the cable to the rear away from the
s
unit.
English–1
PHG 600-3 PHG 630 DCE
0 603 29B 0.. 0 603 29C 7..
1800 2000
250/350/500 150/300/500
50/400/600 50 ... 630
±10 % ±10 %
– ±5 %
– 0 ... +50
0.8 0.9
/ II
For Your Safety
Working safely with this unit is pos-
sible only when the operating and
safety information are read com-
pletely and the instructions con-
tained therein are strictly followed.
The workplace should be well ventilat-
ed. Gases and vapours that occur are
frequently detrimental to health.
/ II