Technical Data; Noise/Vibration Information - Bosch 0 607 450 614 Originalbetriebsanleitung

OBJ_BUCH-275-003.book Page 16 Friday, December 6, 2013 3:12 PM
16 | English
12 Tool bit (e.g. impact socket for hexagon bolts according
to DIN 3129)
13 Hose clamp

Technical Data

Pneumatic Impact Wrench
Article number
0 607 450 ...
No-load speed n
0
Max. tightening
Max. screw dia.
Tool holder
Locking screw 15
Screwdriving 1
Engine oil SAE 40
Spindle extension
Max. working pressure for tool
Thread size of hose connection
– 1/4" NPT
– 3/8" NPT
Inner diameter of hose
Air consumption at no-load
Weight according to EPTA-Procedure 01/2003

Noise/Vibration Information

Measured sound values determined according to EN ISO 15744.
Typically the A-weighted noise level of the pneu-
matic tool is:
Sound pressure level L
pA
Sound power level L
wA
Uncertainty k
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 28927:
h
Tightening of bolts and nuts of the maximum per-
mitted size:
a
h
K
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in
EN ISO 11148 and may be used to compare one pneumatic tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the pneumatic tool. However if the pneumatic tool is
used for different applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may
differ. This may significantly increase the exposure level over the total working period.
An exact estimation of the level of exposure to vibration should also take into account the times when the pneumatic tool is
switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintaining the pneumatic tool
and the accessories, keeping the hands warm, organisation of work patterns.
3 609 929 C44 | (6.12.13)
14 Supply-air hose
15 Locking screw
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
... 614 ... 615
-1
min 10000 7000
Nm 150 350
mm 14 16
 3/8"  1/2"
mm 2.5 4
mm 4 4
ml 15 25
– –
bar 6.3 6.3
psi 91 91
 
– –
mm 10 10
l/s 9 15
cfm 19.1 31.8
kg 1.3 2.4
lbs 2.9 5.3
dB(A) 84 89
dB(A) 95 100
dB 3.0 3.0
2
m/s
< 2.5 2.9
2
m/s 1.5 0.8
... 616 ... 618 ... 619
4500 7000 4500
900 300 850
22 16 22
 3/4"  1/2"  3/4"
4 4 4
6 4 6
40 25 40
 
–
6.3 6.3 6.3
91 91 91

– –
 
–
13 10 13
18 15 18
38.1 31.8 38.1
4.1 2.6 5.9
9.0 5.7 13.0
92 88 90
103 99 101
3.0 3.0 3.0
4.1 3.2 3.4
0.9 0.8 0.8
Bosch Power Tools