Resetting The Device In Case Of Malfunction; Resetting The Device To Factory Settings Via The App - Medion LIFEBEAT P61076 Bedienungsanleitung

NOTICE
The USB socket on the WLAN loudspeaker delivers a charging current of
1 A at an output voltage of max. 5 V. Any devices that you connect to the
WLAN loudspeaker for charging must not consume higher currents.
In order to charge other devices, the WLAN loudspeaker must either
be switched on and the USB charging function selected or the device should be in
standby mode.

19. Resetting the device in case of malfunction

If the device fails to react, disconnect the mains plug from the mains socket and
then plug it in again after a few seconds.

19.1. Resetting the device to factory settings via the app

 Switch the WLAN loudspeaker on.
 Start the LIFEBEAT P app.
 Open the device list by swiping your finger from right to
left on the main screen of the app.
 Now tap on the setting ( ) for the desired WLAN loud-
speaker.
 Now tap on Speaker Info.
DE
EN
TR
55 of 92