Other Notes On Operation; Sensitivity - HomeMatic HM-Sen-MDIR-O Bedienungsanleitung

• The device LED flashes green to indicate that
teaching-in has been successful (how long it will
flash for depends on how much configuration
work has been competed).
• Push the cover down onto the battery compart-
ment (E) and turn it clockwise until it locks into
place. Then push the HomeMatic motion detec-
tor back into the wall mount (F) until it locks.
• If no teach-in operations are carried out, teach-
in mode will be exited automatically after 20
seconds. If other devices are also in teach-in
mode, they will be taught-in.
9

Other notes on operation

9.1 Sensitivity

• If it is operated without the central control unit,
every sensor pulse causes the motion detector to
trip.
• If the central control unit is used, the response
according to the intensity of motion can be set on
the unit.
Examples of use:
- Audible signal: insensitive, e.g. 3 pulses per
period
45