Connect A Playback Device Via Aux In - Silvercrest SBLV 20 A1 Bedienungsanleitung Und Sicherheitshinweise

♦ To end the Bluetooth
on the playback device or switch the Bluetooth
off by pressing the /AUX
switch to AUX mode, the operating LED
NOTE
► The next time you turn on the device it will automatically connect to the last
Bluetooth
device does not automatically reconnect to the device, you will have to re-
establish the connection to your Bluetooth
A detailed description of how to do this can be found in the operating
instructions for your Bluetooth
► If you use a smartphone as your Bluetooth
playback will be paused when there is an incoming call. Acceptance/
termination of the call is carried out via the smartphone. After finishing the
call, the playback will be automatically continued.
► Note that while in Bluetooth
Bluetooth
► If the playback sounds distorted, reduce the volume on the Bluetooth
playback device.

Connect a playback device via AUX IN

You can connect a wide variety of playback devices to this device, for example
MP3 or CD players. Please refer to the operating instructions of the respective
device. To connect external playback devices, you will need an audio cable (not
included). One end of the cable must have a 3.5 mm jack plug to connect to
the 3.5 mm jack socket
depend on the audio output of the external device.
CAUTION
► Switch off all devices before connecting them with each other and follow
the operating instructions of the devices you want to connect.
♦ Connect the line-out connector of the external playback device (e.g. headphone
socket) via a 3.5 mm jack cable to the 3.5 mm AUX IN jack socket
rear of the device.
♦ Move the toggle switch
ation is activated when you turn on the device and the operating LED
blue.
♦ Press the /AUX
up orange.
♦ Switch on the connected playback device and start playback.
♦ Turn off both devices before you disconnect them from each other.
│ GB │ IE
■ 10
connection, either deactivate the Bluetooth
®
button and switching to AUX mode. When you
playback device connected. If your Bluetooth
®
playback device.
®
mode, you can also set the volume via the
®
playback device.
®
. The type of plug on the other end of the cable will
to the ON position. By default, Bluetooth
button to switch to AUX mode. The operating LED
® operation on the speaker
lights up orange.
playback device manually.
®
playback device, the audio
®
function
®
playback
®
®
on the
oper-
®
flashes
lights
SBLV 20 A1