Hotpoint Ariston FT 85.1 Bedienungsanleitung Seite 13

THE ANALOGUE PROGRAMMER FOR START/END COOKING TIME
How to reset the correct time
The oven must be plugged in.
Press the knob and turn it anticlockwise until you set the
correct time.
NB: The clock is electrically powered, therefore in the event
of a power shortage, it will stop working for the entire dura-
tion of the same. Following this power failure, the correct
time will have to be reset.
Manual operation
NB.: To be used in all cases where programmed
cooking is not necessary.
1 Turn the knob anticlockwise until the symbol
in the window.
2 Pull the knob and turn it anticlockwise until the knob
marker lines up with correct time. A click will indicate the
operation is over.
With the oven selector knob, select the desired cooking mode.
To turn the oven off, set the same back to the "0" position.
12
6
appears
Programming cooking with immediate start
1 Turn the knob anticlockwise until the desired cooking time
is displayed in the window.
2 Pull the knob and turn it anticlockwise until the knob
marker lines up with the correct time. A click will indicate
the operation is over.
With the oven selector knob, select the desired cooking mode.
The oven comes on immediately and stays on for the entire
duration of the set cooking time. A buzzer will sound to in-
form you the oven has come off.
To interrupt it, turn the knob anticlockwise until the symbol
appears in the window.
Programming cooking with delayed start
1 Cooking time:
Turn the knob anticlockwise until the desired cooking time
is displayed in the window.
2 Cooking start:
Pull the knob and turn it anticlockwise until the knob
marker lines up with the desired time for cooking to start.
With the oven selector knob, select the desired cooking mode.
The oven will come on at the desired cooking start time and
will stay on for the entire duration of the set cooking time. A
buzzer will sound to inform you the oven has come off.
To interrupt it, turn the knob anticlockwise until the symbol
appears in the window.
14