Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.5 DAY/NIGHT
To enter DAY/NIGHT menu, press button at MAIN > DAY/NIGHT > AUTO...
IMPORTANT!!!
DAY –> NIGHT and NIGHT –> DAY operations must be examined and verified at the final step of the
installation.
Block the lens for a few seconds for NIGHT mode and release and let it return to DAY mode.
If camera stays at NIGHT mode more than 0sec, increase N –> D THRES a little and repeat the fore-menti-
oned steps.
If the scene is too dim or lens iris was adjusted too low(near close), it may not return to DAY.
DAY/NIGHT
Default
N <–> D
3
DELAY
BURST ON B/W
OFF
Descriptions
N <–> D DELAY is time in second while camera maintains its status before
D <–> N switches.
DELAY can avoid the unwanted/frivolous switching by a short term lights such
like the light from the passing car.
BURST ON B/W determines whether a colour burst signal keeps output or
eliminated when camera switches to B/W.
If set to ON, B/W video signal contains colour burst signal and is more
compatible with the colour equipment but shows the same resolution as
colour video.
If set OFF, the colour burst signal is removed from B/W video and shows better
resolution.
Rarely the compatibility problem may occur with the colour equipment.
35
Werbung
Inhaltsverzeichnis
