Exposure - Eneo VKC-1359BIR/W3P Installation Und Betriebsanleitung

6.4 EXPOSURE

To enter EXPOSURE menu, press button at MAIN > EXPOSURE.
EXPOSURE Default
COLOR ROLL OFF
COMP.
AE PREFRENCE HIGH-
LIGHTS
WDR CONTROL MEDIUM
SENSE-UP AUTO
Descriptions
In NTSC system, the entire colour tone on the monitor may continuously move
reddish and greenish.
COLOR ROLL COMP. – Reduces the colour rolling under the fluorescent lighting.
(NTSC system only)
OFF – Does not compensate the colour rolling.
MODE-M – Compensates the colour rolling when a manual lens is used.
MODE-A – Compensates the colour rolling when an auto iris lens is used.
Sets HIGHLIGHTS or SHADOWS
HIGHLIGHTS – Provides the best detail in the brighter areas. The darker parts of
the scene may under-expose.
SHADOWS – Provides the best detail in the darker areas. It will reduce the
dynamic range and the brighter parts may overexpose.
LOW – Produces an image that has better contrast but less dynamic range and
is suitable for indoor or low-contrast outdoor scenes.
NORMAL – Produces an image that has average contrast and is suitable for
indoor or low-contrast outdoor scenes.
MEDIUM – Produces an image that has better dynamic range and is suitable for
a lobby or high-contrast outdoor scenes.
HIGH – Produces an image that has best dynamic range but less contrast and is
suitable for high-contrast outdoor scenes.
CUSTOM – Provides more flexible compensation by ZONE, RANGE and BIAS
When COLOR ROLL COMP. is set to MODE-A, WDR CONTROL will be fixed as
LOW.
If SENSE-UP is set to AUTO, the maximum sense-up rate can be limited to
x-30FPS, 4x5FPS, 8x-8FPS, 6x-4FPS, 3x-FPS or 64x-FPS in SENSE-UP
SETUP.
The integration frames vary automatically within the max. rate according
to the light level when light becomes low and DSS is operating. The higher
sense-up rate, the higher sensitivity but the slower refresh rate. Some white dots
may appear by sense-up due to the image sensor's long accumulation by a long
shutter period.
34