Inhaltsverzeichnis
Werbung
SECTION 5
High frequency
connector
Torch Insulator Sleeve
To
Torch
5-16
Sleeve moved up on
torch bundle
Torch Bundle
PT-15XL Plasmarc Cutting Torch
5. Insert exposed pilot arc cable into the copper
high frequency connector (H.F.). Tighten set
screws using a 1/16" internal hex wrench. (i.e.
Allen Wrench)
6. Slide the 0.56" diameter PVC tubing (H.F.
connector insulator) down over the copper HF
connector. Secure with PVC electrical tape by
wrapping pilot arc cable enough times to
prevent the PVC insulator from sliding up.
MAINTENANCE
Werbung
Inhaltsverzeichnis
