Troubleshooting - ZANKER KOB55602XK Benutzerinformation

Warning! Danger of electrocution!
Disconnect the fuse before you replace
the lamp.
The lamp and the lamp glass cover can
be hot.
Caution! Always hold the halogen lamp
with a cloth to prevent grease residue
from burning on the lamp.
1. Deactivate the appliance.

Troubleshooting

Warning! Refer to Safety chapters.
What to do if...
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
Steam and condensation settle on
the food and in the cavity of the
oven.
The display shows "12.00".
Service data
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of the
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
The oven is deactivated.
The clock is not set.
The necessary settings are not set.
The fuse is blown.
The lamp is defective.
You left the dish in the oven for too
long.
There was a power cut.
We recommend that you write the data here:
2. Remove the fuses from the fuse box or deactivate
the circuit breaker.
The back lamp
1. Turn the lamp glass cover counterclockwise to
remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C heat-
resistant lamp.
4. Install the glass cover.
Activate the oven.
Set the clock.
Make sure that the settings are cor-
rect.
Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
Replace the lamp.
Do not leave the dishes in the oven
for longer than 15 - 20 minutes after
the cooking process ends.
Reset the clock.
appliance cavity. Do not remove the rating plate from
the appliance cavity.
.........................................
.........................................
.........................................
Remedy
17