Sony KDS-55A2000 Bedienungsanleitung Seite 40

Digital Tuning
40
GB
Technical Set-up
Displays the Technical Set-up menu.
"Auto Service Update": Enables the TV to detect and store new digital services as
they become available.
"Software Download": Enables the TV to automatically receive software updates
free through your existing aerial (when issued). It is recommended that this option
be set to "On" at all times. If you do not want your software to be updated, set this
option to "Off".
"System Information": Displays the current software version and the signal level.
"Time Zone": Allows you to manually select the time zone you are in, if it is not the
same as the default time zone setting for your country.
CA Module Set-up
Allows you to access a Pay Per View service once you obtain a Conditional Access
Module (CAM) and a view card. See page 43 for the location of the
socket.
Notes
• CAM is not supported in all countries. Check with your authorized dealer.
• "CA Module Set-up" is available only when a CAM is inserted.
Displays the "Digital Tuning" menu.
Digital Auto Tuning
Tunes in all the available digital channels.
Usually you do not need to do this operation because the channels were already tuned
when the TV was first installed (page 8). However, this option allows you to repeat
the process (e.g. to retune the TV after moving house, or to search for new channels
that have been launched by broadcasters).
Programme List Edit
Removes any unwanted digital channels stored on the TV, and changes the order of
the digital channels stored on the TV.
F f
1
Press / to select the channel you want to remove or move to a new
position.
If you know the programme number
Press the number buttons to enter the three-digit programme number of the broadcast
you want.
2 Remove or change the order of the digital channels as follows:
To remove the digital channel
Press . A message that confirms whether the selected digital channel is to be
deleted appears. Press
To change the order of the digital channels
g F
Press , then press
Repeat the procedure in steps 1 and 2 to move other channels if required.
3 Press RETURN.
Digital Manual Tuning
Tunes the digital channels manually.
1
Press the number button to select the channel number you want to
manually tune, then press
2 When the available channels are found, press
you want to store, then press
F f
3
Press / to select the programme number where you want to store the
new channel, then press
Repeat the above procedure to manually tune other channels.
G
to select "Yes", then press
f
/ to select the new position for the channel and press
F f
/ to tune the channel.
.
.
(PCMCIA)
.
G
F f
/ to select the channel
.