Useful Functions; Songpal With Iphone/Android Smartphone - Sony MEX-N4200BT Bedienungsanleitung

Useful Functions

SongPal with iPhone/
Android smartphone
Downloading the latest
version of "SongPal"
application is required
from the App Store for
iPhone or from Google
Play for Android
smartphone.
Notes
• For your safety, follow your
local traffic laws and
regulations, and do not
operate the application
while driving.
• "SongPal" is an app for controlling Sony audio
devices which are compatible with "SongPal", by
your iPhone/Android smartphone.
• What you can control with "SongPal" varies
depending on the connected device.
• To make use of "SongPal" features, see the details
on your iPhone/Android smartphone.
• For further details on "SongPal," visit the following
URL: http://rd1.sony.net/help/speaker/songpal/
• Visit the website below and check the compatible
iPhone/Android smartphone models.
For iPhone: visit the App Store
For Android smartphone: visit Google Play
Establishing the SongPal
connection
1
Make the BLUETOOTH connection
with iPhone/Android smartphone
(page 7).
To select the audio device, press MENU,
then select [BLUETOOTH]  [SET
AUDIODEV] (page 21).
2
Launch the "SongPal" application.
3
Press MENU, rotate the control dial to
select [SONGPAL], then press it.
4
Rotate the control dial to select
[CONNECT], then press it.
Connection to iPhone/Android
smartphone starts.
For details on the operations on iPhone/
Android smartphone, see the help of the
application.
16
GB
If the device number appears
Make sure that the number is displayed
(e.g., 123456), then select [Yes] on the
iPhone/Android smartphone.
To terminate connection
1
Press MENU, rotate the control dial to select
[SONGPAL], then press it.
2
Rotate the control dial to select [CONNECT],
then press it.
Selecting the source or application
You can operate to select the desired source
or application on iPhone/Android
smartphone.
To select the source
Press SRC repeatedly. Alternatively, press
SRC, rotate the control dial to select the
desired source, then press ENTER.
To display the source list
Press SRC.