Before First Use; Product Features; Specifications; How To Charge - Brunton F-BEAM-BK Schnellstartanleitung

BEFORE FIRST USE

Before first and every use, charge the unit battery fully following the instructions on
"HOW TO CHARGE". When the lantern is not in use for a long period, the runtime of the
light will be shortened due to the self-discharge of the battery.

PRODUCT FEATURES

• 3 Light Modes: High, Low, Red Light
• Built in 3.7V 1600mAh Lithium Battery
• DC 5V/2.1A USB output for charging electronic USB devices
• DC 5V/1A micro-USB input (Charger Port)
1. Integrated Handle with Hook
2. Main Button (Power and mode selection)
3. Battery Power Indicator (BPI)
4. USB Cover
5. Micro-USB Lantern Charger Port
6. USB Output Port
7. Micro-USB Charging Cable
2
3

SPECIFICATIONS

Illumination (Lumens): High—120 Low—45
Runtime (ANSI FC-1 Standard): High—3 Hrs 15 Mins Low—12 Hrs
Battery Type: 3.7V 1600mAh Lithium battery
Operating Temperature: -4˚f to 113˚f (-20˚c to 45˚c)
Operating Humidity: ≤ 90%

HOW TO CHARGE

Fully charge the lantern using the supplied micro-USB charging cable.
1. Connect the micro-USB charging cable into the charging port at the back of the
BEAM, and the USB end of the micro-USB charging cable into your home power
outlet (DC5V power sources), computer, or other USB power source.
2. Standard charging time is approximately 3 hours. Be careful not to charge it for
more than 8 hours. Over charging will damage the battery.
BR-Manual-Beam 7.0.indd 2
1
4
2
7
6
5
Red —20 Hrs
9/10/15 7:01 PM