Setting The Duration - AEG Electrolux BE7614000 Benutzerinformation

14
Clock functions
Reset the Count Up Timer: touch
until the display shows "00:00" and the Count Up Timer starts to count up again.
You can not use Count Up Timer when Duration or End is set.

Setting the DURATION

1. Activate the appliance and set an oven function and temperature.
2. Touch
play shows
flashes in the display.
3. Use
TION.
4. Touch
5. Use
If you touch
the END function.
6. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
Touch any sensor field to stop an acoustic signal.
7. Deactivate the appliance.
Setting the END
1. Activate the appliance and set an oven function and temperature.
2. Touch
flashes in the display.
3. Use
firm.
4. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
5. Touch any sensor field to stop an acoustic signal.
6. Deactivate the appliance.
Setting the SET+GO
To start of the appliance with necessary settings with only one touch of the sensor field,
any time later.
1. Set an oven function (or programme) and temperature (refer to "Setting the oven func-
tion" and "Changing the oven temperature").
2. Set DURATION (refer to "Setting the DURATION").
3. Touch
4. Touch
The display shows
ted.
again and again until the dis-
.
or to set minutes for DURA-
to confirm
or to set hours for DURATION. After 5 seconds the appliance starts.
or during setting hours for DURATION, the appliance goes to setting of
again and again until the display shows
or to set END (first you set minutes and then hours) and
again and again until
to set the SET+GO function.
and
again and again until
will flash in the display.
with a dot. This dot shows which clock function is activa-
flashes in the display. Touch
.
or to con-