Sony WAHT-SBP2 Bedienungsanleitung Seite 8

3
Connect the speakers.
Connect the speaker cords to match the
color of the SPEAKERS jacks of the
unit.
x To connect the speaker cords
to the surround amplifier
When connecting to the surround
amplifier, insert the connector until it
clicks.
S P E A
0
- R T 1
E Z W
x To connect the speaker cords
to the speakers
Be sure to match the speaker cords to
the appropriate terminals on the
speakers: the speaker cord with the
color tube to 3, and the speaker cord
without the color tube to #. Do not
catch the speaker cord insulation in the
speaker terminals.
Connector
8
GB
Gray
(Speaker
(R: right))
R
L
E
E U S
D A N C
IM P E 3 -1 6
K E R S
Blue
(Speaker
(L: left))
Color tube
Rear of
the speaker
Note
• Do not connect the speaker cords supplied with
the Wireless Surround Speaker Kit to any of the
speaker jacks on your S-AIR main unit.
4
Connect the AC power cords
(mains leads).
Before connecting the AC power cords
(mains leads) of your S-AIR main unit
and the surround amplifier to wall
outlets (mains), make sure that all
speakers are connected.
3
#