Picture In Picture (
¦
PIP
t
Watches simultaneously the TV tuner and one external video
source. PIP (Picture-in-Picture) does not function in the same
mode.
✎
NOTE
x
If you turn the TV off while watching in
PIP window will disappear.
x
You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
x
PIP settings
Main picture
Component, HDMI1/DVI,
HDMI2, HDMI3, HDMI4,
PC
: Activate or deactivate the PIP function.
PIP (Off / On)
■
Channel
: Select the channel for the sub-screen.
■
Size (
Õ / Ã): Select a size for the sub-picture.
■
Position (
à / – / — / œ): Select a position for the
■
sub-picture.
Sound Select (Main / Sub)
■
desired sound (Main / Sub) in PIP mode.
Support Menu
Self Diagnosis
Self Diagnostic might take few seconds, this is part of the
normal operation of the TV.
Picture Test (Yes / No)
: Use to check for picture
■
problems and if the problem continues to occur check
the colour pattern.
Sound Test (Yes / No)
: Use the built-in melody sound to
■
check for sound problems.
✎
If you hear no sound from the TV's speakers,
before performing the sound test, make sure
Speaker Select is set to TV speaker in the
Sound menu.
✎
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the
PIP)
PIP mode, the
Sub picture
TV
: You can choose the
button.
MUTE
Signal Information
: (digital channels only) HDTV
■
channel's reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
Troubleshooting
: If the TV seems to have a problem,
■
refer to this description.
✎
If none of these troubleshooting tips apply, contact
the Samsung customer service centre.
Software Upgrade
Software Upgrade can be performed via a broadcasting
signal or by downloading the latest firmware from samsung.
com to a USB memory device.
Current Version the software already installed in the TV.
✎
Software is represented as "Year/Month/Day_Version".
Software Upgrade
Current Version
2010/01/18_000001
By USB
By Online
By Channel
Standby Mode Upgrade : 2 hours later
Alternative Software
----/--/--/--_------
U Move E Enter R Return
Installing the Latest Version
By
USB: Insert a USB drive
■
containing the firmware
upgrade file, downloaded
from www.samsung.com,
into the TV. Please be
careful not to disconnect
the power or remove the
USB drive until upgrades
are complete. The TV
will be turned off and on
automatically after completing the firmware upgrade.
When software is upgraded, video and audio settings
you have made will return to their default settings. We
advise you to write down your settings so that you can
easily reset them after the upgrade.
►
TV Side Panel
TV Rear Panel
or
USB Drive
21
English