Picture In Picture (Pip); Software Upgrade; Support Menu; Self Diagnosis - Samsung LE26C450 Bedienungshandbuch

Basic Features

Picture In Picture (PIP)

¦
PIP
t
Watches simultaneously the TV tuner and one external video
source. PIP (Picture-in-Picture) does not function in the same
mode.
✎
NOTE
x
If you turn the TV off while watching in
PIP window will disappear.
x
You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
x
PIP settings
Main picture
Component, HDMI1/DVI,
HDMI2, HDMI3, PC
PIP (Off / On) : Activate or deactivate the PIP function.
■
Size ( Õ / Ã): Select a size for the sub-picture.
■
Position ( à / – / — / œ): Select a position for the
■
sub-picture.
Channel : Select the channel for the sub-screen.
■
Sound Select (Main / Sub)
■
desired sound (Main / Sub) in PIP mode.

Support Menu

Self Diagnosis

Self Diagnostic might take few seconds, this is part of the
normal operation of the TV.
Picture Test (Yes / No)
■
problems and if the problem continues to occur check
the colour pattern.
Sound Test (Yes / No)
■
check for sound problems.
✎
If you hear no sound from the TV's speakers,
before performing the sound test, make sure
Speaker Select is set to TV speaker in the
Sound menu.
✎
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the
20
English
PIP mode, the
Sub picture
TV
: You can choose the
: Use to check for picture
: Use the built-in melody sound to
MUTE button.
: (digital channels only) HDTV
Signal Information
■
channel's reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
Troubleshooting : If the TV seems to have a problem,
■
refer to this description.
✎
If none of these troubleshooting tips apply, contact
the Samsung customer service centre.

Software Upgrade

Software Upgrade can be performed via a broadcasting
signal or by downloading the latest firmware from
samsung.com to a USB memory device.
Current Version the software already installed in the TV.
✎
Software is represented as "Year/Month/Day_Version".
Software Upgrade
Current Version
By USB
by Channel
Standby Mode Upgrade Off
Alternative Software
U Move E enter R return
Installing the Latest Version
By USB : Insert a USB drive
■
containing the firmware
upgrade file, downloaded
from www.samsung.com,
into the TV. Please be careful
not to disconnect the power
or remove the USB drive
until upgrades are complete.
The TV will be turned off
and on automatically after
completing the firmware
upgrade. When software is upgraded, video and audio
settings you have made will return to their default
settings. We advise you to write down your settings so
that you can easily reset them after the upgrade.
2010/01/18_000001
►
----/--/--/--_------
TV Side Panel
USB Drive