Troubleshooting - Samsung HW-J6500R Bedienungsanleitung

TROUBLESHOOTING

TROUBLESHOOTING
TROUBLESHOOTING
Before requesting service, please check the following.
The unit will not turn on.
• Is the power cord plugged into the outlet?
A function does not work when the button is pressed.
• Is there static electricity in the air?
Sound is not produced.
• Is the Mute function on?
• Is the volume set to minimum?
The remote control does not work.
• Are the batteries drained?
• Is the distance between the remote control and main
unit too far?
The TV SoundConnect (TV pairing) failed.
• Does your TV support TV SoundConnect?
• Is your TV firmware the latest version?
• Does an error occur when connecting?
The red LED on the subwoofer blinks and the subwoofer is not producing sound.
• Your subwoofer may not be connected to the
main unit of the product.
The subwoofer drones and vibrates noticeably.
• Try to adjust the vibration of your subwoofer.
¼ Connect the power plug to the outlet.
¼ Disconnect the power plug and connect it again.
¼ Press the (Mute) button to cancel the Mute
function.
¼ Adjust the volume.
¼ Replace with new batteries.
¼ Move closer to the unit.
¼ TV SoundConnect is supported by some Samsung
TVs released from 2012 on. Check your TV to see if it
supports TV SoundConnect.
¼ Update your TV with the latest firmware.
¼ Contact the Samsung Call Centre.
¼ Reset TV SoundConnect and connect again.
To reset the TV SoundConnect connection, press
and hold the p button for 5 seconds.
¼ Try to connect your subwoofer again.
(See Page 14)
¼ Press the WOOFER button on your remote control to
adjust the subwoofer's volume level (between -12, -6
~ +6).
28