Samsung DA-E750 Bedienungsanleitung Seite 18

to connect the Wireless Audio with Dock through a JBc (JukeBox
connect) connection
1. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the
icon appears in the display.
• Each time you press the button, the selection changes as follows :
; ; ;
The indicator changes from white to red and blinks.
2. Press and hold the WPS/reSet button on the back panel with a pen tip or similar item for more
than 5 seconds. The indicator blinks in white once. Wait until the indicator blinks in white twice
more, and then release the WPS/reSet button.
• The indicator blinks in red, and then stops blinking and glows in red when the unit accesses the
Network Setting mode.
3. To connect the Wireless Audio with Dock to the network, search for "Samsung W_Audio e750
XXXXXXX" in the Wi-Fi Setting list of your WI-Fi device, and then select it.
ex) Samsung Galaxy Device
4. Open the web browser of the Wi-Fi device, and then type
"http://192.168.1.1" into the address bar of the Internet browser
to access the Wireless Audio with Dock's web page.
5. In the "Service Set iD (SSiD)" field, select the AP device (router
or modem) your Wi-Fi device is connected to.
6. Type the AP device's password into the "WPA Passphrase"
filed. If you want to set the static IP, press advanced settings. Fill
in the desired static IP address.
7. Press <Apply>.
If a warning appears on your Wi-Fi device, click OK.
8. When the connection between the Wireless Audio with Dock and
AP you selected is completed, the indicator on the Wireless
Audio with Dock changes to white.
• The Wireless Audio with Dock connection is complete.
 The picture above is the screen which will appear on the display after
completing the network connection successfully, so you can run AirPlay
or DLNA normally.
18
; ; ; aUX (LeD Off)
or
5
6
6
7