Power Lights - Dell OptiPlex 330 dcsm Schnellreferenzhandbuch

Tab
Results
Errors
Help
Configuration
Parameters
5 When the tests are complete, close the test screen to return to the Main
Menu screen. To exit the Dell Diagnostics and restart the computer, close
the Main Menu screen.
6 Remove the Dell Drivers and Utilities media (if applicable).

Power Lights

CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
The power button light (bi-color LED) located on the front of the computer
illuminates and blinks or remains solid to indicate different states:
• If the power light is off, the computer is either turned off or is not
receiving power.
– Reseat the power cable in the power connector on the back of the
computer and the electrical outlet.
Function
Displays the results of the test and any error conditions
encountered.
Displays error conditions encountered, error codes, and
the problem description.
Describes the test and may indicate requirements for
running the test.
Displays your hardware configuration for the selected
device.
The Dell Diagnostics obtains configuration information
for all devices from system setup, memory, and various
internal tests, and it displays the information in the
device list in the left pane of the screen. The device list
may not display the names of all the components
installed on your computer or all devices attached to your
computer.
Allows you to customize the test by changing the test
settings.
Quick Reference Guide
51