Installing Amd Chipset Driver; Using The Ati Catalyst ® Control Center; Using An Add-On Graphics Card - Asus M3A78-T Handbuch

6.1.3

Installing AMD Chipset Driver

To install the driver that supports Hybrid CrossFireX technology:
1. Insert the Support DVD that comes with your motherboard into the optical
drive. The DVD automatically displays the Drivers menu if Autorun is enabled
in your computer.
If Autorun is NOT enabled in your computer, browse the contents of the support
DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the
ASSETUP.EXE to run the DVD.
From the Drivers menu, click AMD Chipset Driver to install it. Follow the
2.
onscreen instructions to finish the installation.
3. Restart your computer after the installation is completed.
4. When the system restarts, wait for a few seconds for the driver to load
automatically.
6.1.4 Using the ATI CATALYST

Using an add-on graphics card

1. Install a graphics card onto your motherboard. Refer to the User Guide that
comes with your graphics card for details.
2. Right-click on the Windows
Center from the shortcut menu. The ATI CATALYST Control Center screen
appears.
Click Graphics Settings > CrossFire™, then select the Enable
3.
CrossFire™ check box. When a
confirmation message pops up,
click Yes. The screen blacks out
for about one minute.
Click OK. The add-on graphics
4.
card is set to be the main monitor.
6-2
Control Center
®
desktop, then click ATI CATALYST(R) Control
®
Chapter 6: ATI Hybrid CrossFireX technology support