Error Codes; Error Code Explanation - JVC MC-8200LU Bedienungsanleitung

10. ERROR CODES

In the event an error, the control panel indicator blinks and the LCD shows the error details by overriding any other information.
POWER
The indicator blinks.

10-1. Error code explanation

LCD displays in the event of error
ERROR OCCURRED !
If the transport lock of the carrier
has not been opened, this section
shows "CHECK CAR. SCREW".
E R R M G – 2 – – –
– – – – – 1 1
Units in error and unit detail codes
Unit in error
C
M
D1 to D4
• When an error occurs, write down the error code before turning the power off, except in the case of an urgent problem
such as smoke.
• When an error occurs, make sure not to turn off the power in order to prevent further problems such as disc damage, and
contact your dealer or nearest JVC service center immediately.
DISC = 124
CODE = CU - 07
Display when
CODE = CC-31
–
Carrier
Mail slot
Drive
MODE
DISC = 124
CODE = CU - 07
Disc No. : Shows the disc No. being accessed at the moment of error
occurrence. "---" is displayed if no disc is accessed at the moment
of error occurrence.
Unit detail code
U Up/down
L Tray lock
C Catcher
D Disc
F Flip
E Ejection
L Loading
T Tray
T Tray
C Clamp
E Ejection
D Disc
S Spindle
SELECT LOAD/EJECT
MAIL SLOT
Disc No.
Error code
Unit detail code
Unit in error