Hybrid Card 4 - HeiTel CamDisc VG HNVR Schnellinstallationsanleitung

HeiTel Digital Video GmbH - Quick Installation Guide CamDisc VG HNVR
Component Description
HDD Case USB External USB adapter for independent device evaluation of CamDisc VG/Cam4mobile
removable hard disks
ISDN Card ISDN module with S0/I.430 interface for transmission via one B channel
PSTN Card Analogue modem module for data transfer using ITU V.90 or V.34
19" Mount Kit (2 RU) Installation kit (2 RU) for 19" mounting of up to two HeiTel devices (2 RU)
CamMount Kit Two-part mounting plate for installation including strain relief

HYBRID Card 4

Installed
HYBRID Card 4
CamDisc VG HNVR
On the basic device CamDisc VG
BNC sockets for analogue cameras are not
activated. To use them, you require the
HYBRID Card 4, which is available separately.
A CamDisc VG HNVR supports a maximum
of two such expansion cards, which together
make it possible to operate a total of eight
analogue cameras. A single HYBRID Card
to four analogue cameras. The number of analogue inputs used reduces the
number of IP cameras possible on the CamDisc VG
In total, a maximum of 10 cameras are supported.
Installing and mounting the HYBRID Card 4
When installing the
instructions that come with the card.
The individual installation stages, including a function test, are described in
these instructions.
Parameterisation of the HYBRID Card 4
To set the parameters on the
HYBRID Card 4, open
dialogue window
Recorder settings/
HYBRID Card 4 using your
CamControl LITE
CamControl PRO software
(minimum requirement: Version
4.11 in each case).
The graphic shows the recorder settings for a CamDisc VG
installed HYBRID Card
expansion card, the DSP information is displayed (e.g. BF547 / 01.02 / 00.02
/ 01.15).
The Enabled option allows you to take the relevant analogue video inputs
into operation.
Please note that an enabled analogue video input always has priority over
an IP camera that has been configured for the same channel.
HNVR, the
4 makes it possible to operate up
HYBRID Card 4, always follow the installation
the
or
4. For the individual camera channels for the
VG
HNVR.
HNVR with an
21