64
Technical data
– The indicator lights for function buttons A, B, and C start to flash.
4. Release function buttons B and C.
5. Press function button B.
– The indicator lights for function buttons A and C go off.
– The indicator light for function button B continues to flash.
– The display shows the current set.
6. Press function button B again.
– The display shows the new adjustment.
7. Switch off the appliance to keep the operation.
Technical data
Dimensions
Water supply pressure
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of the appliance door shows the electrical connection
data.
If the hot water comes from alternative sources of energy, (e.g. solar panels, photovoltaic
panels and aeolian), use a hot water supply to decrease energy consumption.
Environment concerns
The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please contact
your local council, your household waste disposal service or the shop where you purchased
the product.
Recycle the materials with the symbol
recycle it.
Width
Height
Depth
Minimum
Maximum
1)
Cold water or hot water
Place settings
on the product or on its packaging indicates that this product may not be
Rinse aid dispenser deactivated
Rinse aid dispenser activated
. Put the packaging in applicable containers to
596 mm
818 - 898 mm
550 mm
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
maximum 60 °C
12