Pioneer DEH-615RDS Bedienungsanleitung Seite 6

Balance Adjustment
Press button [13] to select balance
adjustment mode. ("FAD" appears on the
display.) Adjust the fader using the (+) or (-)
side of button [2]. To adjust the balance,
press either the (4) or (») side of button [2]
to turn on BAL.
Fader
Press the (+) side of button [2] to raise the
volume of the front speaker only. Press the
(-) side of the button to raise the volume of
the rear speaker only.
(Display shows "FAD F9" ~ "FAD R9".)
* Please set "FAD 0" when using 2 speaker
system.
Balance
Pressing the (<4) side of button [2] shifts the
balance to the left speaker, while the (>)
side shifts it to the right speaker.
(Display shows "BAL L9" ~ "BAL R9".)
Tone Adjustment ;
Press button [13] to select tone adjustment
mode. ("BAS" appears.) Select the tone
you wish to adjust using the (4) or (P) side
of button [2]. Each press of the (>) side
changes the tone from BAS — TRE, while
each press of the (<4) side changes the tone
from TRE — BAS.
Bass Adjustment
Select the Bass mode.
Pressing the (+) side of button [2] increases
bass, while the (-) side decreases bass.
(Display shows "BAS -6" ~ "BAS +6".)
Treble Adjustment
Select Treble adjustment mode.
Pressing the (+) side of button [2] increases
treble, while the (-) side decreases treble.
(Display shows "TRE ~6" ~ "TRE +6".)
Loudness ¢djustment
This "loudness" function enhances both
the high and low ranges of sound to give
even more power to output even at low
volume.
Press button [13] to select loudness
adjustment mode. (The "LOUD" indicator
appears on the display.)
Pressing the (P) side of button [2] turns the
loudness function on (LOUD [25] light up),
pressing the (4) side turns it off.
Attenuator
* DEH-515RDS does not have this function.
The volume will be reduced to about 1/10.
Press button [14]. ("VOL12" will blink.) To
cancel, press the button again.