Herunterladen Diese Seite drucken

ECOVACS DEEBOT T50 OMNI Bedienungsanleitung Seite 15

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operate DEEBOT
8
1. Start Mapping
When creating a map for the first time, please follow the robot to help resolve some
minor issues.
For instance, if the robot gets stuck in a narrow space under furniture, you may refer
to the following solutions:
① Raise the furniture to create a passage for the robot if feasible.
② Cover the bottom of the furniture to prevent the robot from trying to enter.
③ Set up Virtual Boundary in the App to prevent the robot from entering.
2. Start Cleaning
• The robot's water tank is automatically refilled through the Station. Manual refilling
is not needed.
• When mopping, the robot will recognize floor types and is able to lift mops
automatically when encountering carpets. Please do not use the robot on shaggy
rugs or carpets with fibres longer than 10 mm. It is recommended to fold up the
shaggy rugs with fibres longer than 10 mm during the cleaning process, or set
the shaggy carpeted area as a No-Entry Zone by setting Virtual Boundary in the
ECOVACS HOME App.
Before cleaning for the first time, please make sure the robot is in the Station and
fully charged. Tap
on the robot to start. You can also use the ECOVACS HOME
App or Voice Control to start.
Note:
Do not frequently remove washable mopping pads.
Do not use a rag or any other object to scratch the Moping Pad Plates.
When the ECOVACS HOME App prompts that the mops need to be replaced,
please replace them in time. Explore more accessories on ECOVACS HOME
App or at https://www.ecovacs.com.
EN
14
3. Pause
Tap
on the robot to pause it while it is working. You can also use the ECOVACS
HOME App or Voice Control to pause the robot.
4. Wake up
After pausing for a while, all indicator lights on the robot will go out. To wake up the
robot, press
.
5. Return to Station
Use the ECOVACS HOME App or Voice Control to recall the robot, or press and
hold the Button on DEEBOT
for 3 seconds, to allow the robot to dock for
charging.
3 s
6. Deep Sleep Mode
The robot will enter deep sleep mode to protect the battery if it stays outside the
Station for about 5 h. Please switch OFF and ON to wake up the robot.

Werbung

loading

Diese Anleitung auch für:

Ddx57