DJI FLIP Schnellstartanleitung

Quick Start Guide
快速入门指南
v1.0
https://s.dji.com/guide88
1
Press both the left and right sides to remove the gimbal protector ;
2 Remove and throw away the disposable rubber cover.
1
按压左右两侧取下云台保护罩；
Charge to activate the battery until the battery level LEDs are on. The
four LEDs stay on when the battery is fully charged.
充电激活电池，电量指示灯亮起，表示电池激活成功。4 个灯常亮表示电池
已充满。
Battery Level LEDs
Unfold the front and rear arms in sequence.
Automatic Power On: Unfold either one of the rear arms.
Manual Power On/Off: Press and then press and hold the power button.
依次展开前、后机臂。
自动开机：展开任意一个后机臂。
手动开机 / 关机：短按一次，再长按 2 秒电源按键。
Front
前
Rear
后
Mount the control sticks on the remote controller and unfold the antennas.
安装摇杆，展开天线。
2
电量指示灯
• Install DJI Fly App (Necessary)
• Watch Video Tutorials
• Read User Manual
• 安装 DJI Fly App（必需）
• 观看教学视频
• 阅读用户手册
2
移除并丢弃一次性橡胶盖。
Press, then press and hold to
power on/off.
短按一次，再长按2秒开启/关闭
Power On/Off: Press, then press and hold
开机/关机：短按一次，再长按2秒
1
Press both sides to remove
按压左右两侧取下
Power Button
电源按键