Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
TECHNICAL DATA
1. Electrical components:
Input voltage:
Output voltage:
Duty cycle:
SAFETY
Never mount the product upside down (ceiling mounting). This will damage the TV mount and the TV used. This TV lift can be rotated 360 degrees.
Please ensure that the TV or monitor is in the correct starting position before using the TV lift to protect the TV.
This product can also be used by children aged 8 and over and by people with slight physical or mental disabilities after appropriate explanation/
training in the safe use of the product. Please expressly draw the attention of all persons in these groups to possible dangers. Children must not be
allowed to play with the product.
It is not recommended to set the operating mode of the TV lift to 'One Touch', as this mode is not permitted in some countries. Please
1
inform yourself before changing the settings.
BEFORE THE FIRST USE
This is how you make the TV lift ready for use:
1.
Connect the control box, the operating element, the lifting column, the motor cable and the power supply correctly.
2.
The LED display on the hand control now shows the current height of the TV lift.
The TV lift is now ready for use.
HANDSET
1. Up/Down
Press and hold the „
" button, the TV lift moves upwards.
Release to stop.
Press and hold the „
" button, the TV lift moves upwards.
Release to stop.
2. Display
The display shows the height of the TV lift. In addition, the
selection codes for the setting and the error codes are also displayed here.
3. „S" key
The 'S' key is used to select and save settings.
4. Standby
Activate the TV lift by pressing any button. The display shows the current height.
5. Memory keys (1 / 2 / 3)
Set the TV lift to the desired height.
Press the „
" button. The display starts to flash.
S
Press the desired memory button (
H1/H2/H3 appears briefly and the button is programmed.
H1/H2/H3 appears briefly and the button is programmed.
Whenever you press and hold the programmed button, the TV lift moves to the saved height.
6. Lock / Unlock
Press the up and down buttons (
To unlock, press and hold the up and down buttons (
shows the height of the TV mount.
7. Anti-collision function
If the TV lift receives pressure against the movement, the TV lift stops and moves slightly in the opposite direction. Please remove the obstacle.
8. Installation recommendation
Press the „
" button + „
" button and hold for 2 seconds. The display shows "O". The device is now
S
in "One Touch" mode.
Press the „
" button + „
" button and hold for 2 seconds. The display shows "C". The device is now
S
in "Constant Touch" mode.
9. Reset
If the system detects a problem, the display shows "RES" and the system must be restarted. Press and
hold the „
" button. After 5 seconds, the TV lift moves down until it reaches the lowest position, then
it moves up again slightly and the display switches back to the height display. When the TV lift stops
moving, the restart is complete.
CORRECT DISPOSAL
This sign indicates that this product must not be disposed through regular household waste within the European Union. To prevent possible harm to the environ-
ment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your
used device, please use the return and collection systems or contact the retailer where the product was purchased. There you can obtain all information
necessary to dispose of this product properly. (WEEE-Reg.-Nr. DE: 52242201)
16
110-240V
24V
25% max, 5 min ein, 18 min aus
Automatic power off,
low energy consumption
/
/
), to programme the selected height.
1
2
3
/
) for 5 seconds until the LED display shows "LOC".
/
) again for 5 seconds until the display no longer shows "LOC". The display now
1
2. TV-mount
Anti-Collison
Built-in load limit switch
Maximum load:
Speed:
Minimum height:
Maximum height:
Travel-Distance:
TV-size:
Display
Menü
80 kg
25 mm/s
820 mm
1820 mm
1000 mm
32-75 inch
Memory keys
Up/Down
USB-Steckplatz
Seitlich mit Ladefunktion
Werbung
