Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If your dryer has a steam feature,
follow the following diagram for the
water discharge connection.
1
3
1 Remove the clamp attached to the stopper
at the back of the dryer by pulling it from
the place it is connected with the help of a
tool.
2 After removing the clamp, pull the plug
under the clamp.
3 Attach the water drain hose supplied with
the machine to the pipe under the plug.
4 Your machine is ready for use with direct
discharge.
The water discharge hose shall be
fixed at maximum 80 cm height.
Ensure that the water discharge
hose do not get kinked, collapsed
or pressed on between the
discharge and the drying machine.
Hose shall be connected not to
NOTICE
be disconnected from its location.
Leaked water may cause damage.
Do not extend the water drainage
hose.
Check whether the water runs at an
appropriate flow. The drainage line
shall not be closed or clogged.
If an accessory package is provided
with your product, check the
detailed instructions.
Dryer / User Manual
2
4
4.4 Adjusting the stands
Until the drying
machine stands level
and sturdy, adjust
the stands by turning
them left and right.
4.5 Moving the drying machine
•
Drain the water in the drying machine
completely.
•
If the product is connected via direct
discharge, remove the hose connections.
The drying machine is
recommended to be moved in
upright position. Otherwise, tilt it to
the right side when viewed from the
front and move the drying machine.
Wait 12 hours prior to operating the
drying machine.
4.6 Warning regarding the noise
When the product is operated,
the accumulated water is pumped
to the water tank. It is normal to
hear pumping sounds from the
appliance during this operation.
4.7 Replacing the lighting bulb
If your drying machine has drum lighting lamp;
Consult the authorized service to replace the
bulb/LED used in lighting your drying machine.
The bulb in this product is not suitable for home
lighting. The intended use of this lamp is to
ensure safely loading the laundry to the drying
machine. The lamps used in this appliance is
resistant to heavy physical conditions such as
temperatures over 50°C.
As the product is
operated, metallic
noises may come
from the compressor
from time to time, it is
normal.
53
Werbung
