Maintenance And Care; Specifications - VOLTCRAFT UFC 1 Bedienanleitung

The set must not be opened or rebuilt for easons of
safety and approval.
Use this set only for charging nickel-metallic hydride
(NiMH) and nickel-cadmium (NiCd) accumulators. Never
charge one-way batteries. Do not use the charging set
for charging rechargeable alkaline accumulators (RAM).
Never charge different accumulators at a time.
Never charge Mignon and microcells at a time. The set
is capable of charging a maximum of 4 identical cells at
a time. Charging different accumulator types at a time
might cause the batteries to burst or leak or might even
injure persons.
Never short-circuit the charging contacts or accumulators.
It is common that the accumulators will heat up while
being charged. Handle freshly charged accumulators
with great care.
The set and accumulators are not a toy for children.
Keep them out of the reach of children.
Instruction for environmental protection:
The law (the provision on exhausted bat-
teries) obliges the end user to return all
used batteries and accumulators (from
button cells to lead accumulators); any
disposal thereof via the domestic waste
is prohibited.
14
- After the accumulator is reset the charging set will be
automatically switched off and the REFRESH LED is
extinguished. There is no automatic start of the
rapid charging procedure after the refreshing
operation.

Maintenance and care

Disconnect the charging set, the plug-in power supply
unit as well as the adapter from all power supplies prior to
any cleaning or maintenance. Only use a soft, dry clea-
ning cloth to externally clean the set. Do by no means use
moisture or cleansing agents. Any maintenance or repair
should be solely performed by an expert conversant with
the relevant regulations (VDE 100, VDE 0701).

Specifications

Voltage supply
(Pulsed) charging current : 800 mA Mignon cells (AA)
: Plug-in power supply unit
230 V
alternating-current voltage
: Cigarette lighter adapter
12 V direct-current voltage
300 mA Micro-Cells (AAA)
19